Noise Reduction - Olympus EVOLT E-300 Advanced Manual

NOISE REDUCTION

This function reduces the noise that is generated during long exposures. When
shooting night scenes, shutter speeds are slower and noise tends to appear in
images. When NOISE REDUCTION is set to ON, the camera automatically
reduces noise to produce clearer images. However, shooting time is
approximately twice as long as usual.
For more information about noise generated in images during long exposures,
refer to "Noise in images" (P. 51).
NOISE REDUCTION: OFF
P A S M
Available modes
1
T T
Menu
ON
~
"How to use the menus" (P. 25)
2
OK
Press the
3
Take a picture.
● The noise-reduction process is activated after
shooting.
● The card access lamp blinks during the noise-reduction process. You cannot take more
pictures until the card access lamp goes out.
● Busy is displayed while noise reduction is operating.
● When
, ,
ON.
● When NOISE REDUCTION is set to ON, sequential shooting is not
available.
● This function may not work effectively with some shooting conditions or
subjects.
NOISE REDUCTION
button.
, or mode is set, NOISE REDUCTION is fixed to
NOISE REDUCTION: ON
T
Note
NR
6
MENU
OK
button
105