5
Select the desired flash control mode.
6
Press the shutter button on the
camera halfway.
● Shooting information such as ISO sensitivity,
aperture value, and shutter speed is
communicated between the camera and
flash.
●
lights up in the viewfinder.
7
Press the shutter button all the way.
● When shooting with the flash control mode set to TTL-AUTO, pre-flashes
are emitted before firing the regular flash.
● When the flash control mode is set to TTL-AUTO, or when shooting a
subject at a distance with ISO set to 400 or higher, flash control accuracy
will decrease.
Super FP flash
Super FP flash is available with the FL-50/FL-36. Super FP flash timing is longer
than standard flash timing. This means that pictures can be taken at a higher
shutter speed than is possible with normal flashes.
Flash shooting with the aperture open such as in portrait shooting is also possible
with Super FP flash. For details, refer to the FL-50 manual.
Super FP flash
Viewfinder
blinks:
The flash is
charging.
Note
1/250
F5.6
P
ISO
AUTO
FP
WB
S-AF
FOCUS
AF ILLUMINATOR
DRIVE
HQ
3264
2448
Flash shooting
lights up:
Charging is
complete.
AUTO
AUTO
RGB
s
4
63
Need help?
Do you have a question about the EVOLT E-300 and is the answer not in the manual?