Re-Fitting Of Heads On Cylinders - MOTO GUZZI V1000 I-Convert Workshop Manual

CHANGES FOR ENGINE OVERHAULING· ROCKER COVERS · CYLINDER HEADS
• VALVES· SPRINGS
RE·FITTING OF HEADS ON CYLINDERS
Pay attention that the cylinder lubrication hole
(arrow .. A
»)
is alig ned with both the gasket
lubrication hole (a rrow .. B .. ) and the head
lu brication hole (arrow" C
>0), fig.
244.
130
In order not to damage the cylinder head when
locking the nuls,
it
is necessary to follow a
crossed sequence (1 - 2 - 3 - 4 - 5 - 6 - fig. 29)
and torque to 4 -+- 4,5 Kgm (approx. 20 pounds).
Remember to always replace the gasket bel-
ween cylinder and head.