Refitting The Clutch Lining Assembly - PEUGEOT Django 125 Workshop Manual

SERVICE OPERATIONS
- Remove the clutch linings (2), the upper centring
sleeve (3), the spring (4), and the lower centring
sleeve (5).
- Remove the 3 pins (6) from the variable speed
drive seat.
- Separate the fixed (7) and rotating (8) flanges.
- Make sure surface of the plates in contact with
the belt does not show any cracks or signs of
abnormal wear.

Refitting the clutch lining assembly

- Make sure surface of the plates in contact with
the belt does not show any cracks or signs of
abnormal wear (A).
- Compress the clutch drive pulley and driven
pulley assembly with the tool P/N 758008.
- Tighten the nut (1).
Tightening torque: 58 Nm.
42
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
1 2
6
1
758008
3 4
7
8
A
752361
801682
5