Multifunction Switch - Ford 2003 Mustang Workshop Manual

SECTION 211-05: Steering Column Switches
REMOVAL AND INSTALLATION

Multifunction Switch

Removal
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1. Insert the ignition key into the ignition switch lock cylinder and turn to RUN position.
2. Push the ignition switch lock cylinder release tab with a punch while pulling out the
ignition switch lock cylinder.
3. Remove the tilt wheel handle.
4. Remove the upper and lower steering column shrouds.
1. Remove the screws.
2. Remove the upper and lower steering column shrouds.
5. Remove the multifunction switch.
1. Remove the screws.
2003 Mustang Workshop Manual