11.
CAUTION: The crankshaft journals must be protected from damage when installing
the crankshaft.
Position the crankshaft.
CAUTION: The main bearings are precision selective fit. Inspect the bearing clearance.
For additional information, refer to
12. NOTE: If the rear main bearing cap is not secured within four minutes, the sealant must be
removed and the sealing area cleaned with metal surface cleaner. Allow to dry until there is no
sign of wetness, or four minutes, whichever is longer. Failure to follow this procedure can cause
future oil leakage.
Clean the rear main bearing cap sealing area with metal surface cleaner. Apply silicone gasket
and sealant to the rear main bearing cap-to-cylinder block parting line.
Section 303-00
.