Ford 2003 Mustang Workshop Manual page 711

SECTION 206-09B: Anti-Lock Control — Traction Control
REMOVAL AND INSTALLATION
Switch —Traction Control
Removal and Installation
1. NOTE: If the vehicle is equipped with an automatic transmission, position the shift lever in the 1
position before detaching the floor console finish panel.
Lifting from both sides, detach the floor console finish panel.
2. Disconnect the electrical connector and position the finish panel out of the way.
3. Reaching behind the center finish panel, push and detach the switch from the finish panel.
4. Disconnect the electrical connector and remove the switch.
2003 Mustang Workshop Manual