Ford 2003 Mustang Workshop Manual page 454

11. CAUTION: Do not tighten the fastener at this time.
Connect the knuckle to the upper suspension arm and bushing.
1. Position the knuckle.
2. Install the new cam bolt and nut.
12. CAUTION: Do not tighten the fastener at this time.
Connect the knuckle to the lower suspension arm and bushing.
1. Position the knuckle.
2. Install the new bolt and nut.
13. Connect the toe link to the knuckle.
1. Position the toe link.
2. Install the new nut.
3. Install the new cotter pin.