Ford 2003 Mustang Workshop Manual page 2560

23. NOTE: Before assembly, soak the new clutch discs in clean automatic transmission fluid for 15
minutes.
Install the intermediate clutch pack and selective steel plate.
24. Using the special tool, check the intermediate clutch clearance.
1. Position the special tool on the pump case mounting surface.
2. Maintaining downward pressure, use a depth micrometer to measure and verify
intermediate clutch clearance is within specification.
If the intermediate clutch is not within specification, install a correct selective plate.
Selective Steel Plates
1.80-1.70 mm (0.071-0.067 inch)
2.05-1.95 mm (0.081-0.077 inch)
2.31-2.20 mm (0.091-0.087 inch)
2.56-2.46 mm (0.101-0.097 inch)
25. Install the intermediate anti-rattle clip, if equipped.
Specification