SECTION 303-14: Electronic Engine Controls
REMOVAL AND INSTALLATION
Engine Coolant Temperature (ECT) Sensor —Cobra
Material
Item
Pipe Sealant with Teflon
D8AZ-19554-A
Removal and Installation
1. Partially drain the engine cooling system. For additional information, refer to
2. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
3. Remove the ECT sensor.
4. To install, reverse the removal procedure.
Apply sealant to the ECT sensor threads.
Specification
WSK-M2G350-A2
2003 Mustang Workshop Manual
Section 303-03A
.