37. NOTE: Once the torque procedure has been started, final tightening must be finished within five
minutes maximum.
Tighten the CAC bolts in the sequence shown in two stages.
1. Tighten to 2 Nm (18 lb-in).
2. Tighten to 6 Nm (53 lb-in).
38. Tighten the supercharger and CAC cooler assembly-to-lower intake manifold bolts in the
sequence shown in three stages.
1. Tighten to 2 Nm (18 lb-in).
2. Tighten to 25 Nm (18 lb-ft).
3. Tighten an additional 90 degrees.
39. Tighten the coolant supply and return manifold in two stages.
1. Tighten to 10 Nm (89 lb-ft).
2. Tighten an additional 90 degrees.