Ford 2003 Mustang Workshop Manual page 2663

SECTION 308-01: Clutch
REMOVAL AND INSTALLATION
Disc and Pressure Plate —4.6L (4V) Engine
Special Tool(s)
Clutch Aligner
308-020 (T74P-7137-K)
Material
Item
Premium Long Life Grease
XG-1-C
1. Disconnect the battery ground cable. For additional information, refer to
2. Remove the transmission. For additional information, refer to
3. Remove the starter.
1. Remove the terminal cap.
2. Remove the nuts.
3. Remove the wires and position them aside.
4. Remove the two bolts and the starter.
4. Remove the clutch cable clip, then pull the cable through the clutch housing.
Specification
ESA-M1C75-B
2003 Mustang Workshop Manual
Section 414-01
Section 308-03C .
.