Table of Contents
Advertisement
Storage Management
The Storage Menu displays the status of storage devices installed in the
N5200PRO, and includes storage configuration options such as RAID and disk
settings, folder configuration, and Nsync settings.
Disks Information
From the Storage menu, choose the Disks
item and the Disks Information screen
appears. From here, you can see various
items about installed SATA hard disks. Blank
lines indicate that a SATA hard disk is not
currently installed in that particular disk slot.
If there is a problem with a disk, a Failed
message will be displayed in the Status
column.
Disks Information
Item
Disk No.
Capacity
Model
Firmware
Status
Total Capacity
Disk Power
Management
NOTE
S.M.A.R.T. Information
On the Disks Information screen, the status of each disk
will be displayed in the Status column. Clicking on an OK
or Warning link will display the S.M.A.R.T Information
window for that particular disk.
S.M.A.R.T. Information
Item
Power ON Hours
Description
Indicates disk location.
Shows the SATA hard disk capacity.
Displays the SATA hard disk model name.
Shows the SATA hard disk firmware version.
Indicates the status of the disk. Can read OK, Warning, or
Failed.
Shows the total SATA hard disk capacity.
The administrator can set the disk to power down after a period
of inactivity.
When the Status shows Warning, it usually means there are bad sectors on the hard
disk. It is shown only as a precaution and you should consider changing the drives.
Description
Count of hours in power-on state. The raw value of this attribute
shows total count of hours (or minutes, or seconds, depending
on manufacturer) in power-on state.
26
Advertisement
Table of Contents
