Table of Contents
Advertisement
13. Click on Disk Management and you will see a new hard disk listed.
14. Initialize the new hard disk and you will then be able to use the iSCSI
target as a local drive.
Windows Vista
Because Windows Vista has the Microsoft iSCSI Initiator pre-installed, you will not
have to install this piece of software. Instead, start the iSCSI Initiator and follow
steps 8-14 to map the N5200PRO as an iSCSI drive.
File Backup
There are a number of ways to back up data with the N5200PRO.
Nsync
You can backup a share folder to another N5200PRO (Nsync Target) or any FTP
server for safe keeping as long as you have appropriate access right on that
target. When using Nsync between two N5200PROs, you have the option to
transmit files securely between two N5200PROs.
If the files on your N5200PRO are lost for any reason, you can restore those files
from the target N5200PRO. To backup files regularly, you can set up a scheduled
task to run only once, daily, weekly, or monthly. You can also limit the bandwidth
of your Nsync tasks, so other users on the network can share the bandwidth
equally.
Under the Storage menu, click Nsync and the Nsync window appears. Below is
a description of each field:
Nsync
Item
Task name
Server
Share folder
Last Time
Last Status
Action
Bandwidth Setting
Add
Modify
Restore
Delete
Description
The name of your Nsync task.
The IP address of your target server
The share folder you would want to backup.
The time when the last Nsync task was executed.
The status of your last Nsync task.
Administrator can run or stop an Nsync task by pressing the
action button.
Bandwidth control on Nsync tasks.
Click to add a Nsync task
Click to modify an Nsync task.
Restore share folder from an Nsync target.
Click to delete an Nsync task. Backup files on Nsync target is
also deleted.
65
Advertisement
Table of Contents
