Step 2: Raid Creation; Step 3: Create Local Users Or Setup Authentication; Step 4: Create Folders And Set Up Acls; Step 5: Start Services - Thecus N5200B PRO User Manual

Step 2: RAID Creation

Next, administrators can configure their preferred RAID setting and build their
RAID volume. You can access RAID settings from the menu bar of the Web
Administration Interface by navigating to Storage > RAID.
For more information on configuring RAID, see Chapter 4: System
Management > RAID
Don't know which RAID level to use? Find out more about the different RAID
levels from Appendix C: RAID

Step 3: Create Local Users or Setup Authentication

Once the RAID is ready, you can begin to create local users for the N5200PRO, or
choose to setup authentication protocols such as Active Directory (AD).
For more on managing users, go to Chapter 4: System Management >
and Group Management.
For more information on configuring Active Directory, see Chapter 4: System
Management > User and Group Management >
For information about the benefits of Active Directory, see
Directory Basics.

Step 4: Create Folders and Set Up ACLs

Once users are introduced into your network, you can begin to create various
folders on the N5200PRO and control user access to each using Folder Access
Control Lists.
More information on managing folders, see Chapter 4: System Management >
Folder Management.
To find out about configuring Folder Access Control Lists, see Chapter 4: System
Management > Folder Management >

Step 5: Start Services

Finally, you can start to setup the different services of the N5200PRO for the
users on your network. You can find out more about each of these services by
clicking below:
SMB/CIFS
Apple File Protocol (AFP)
Network File System (NFS)
File Transfer Protocol (FTP)
Media Server
Printer Server
Configuration.
Basics.
Folder Access Control List
20
ADS/NT Configuration.
Appendix D: Active
User
(ACL).