System Settings; System Notifications; System Logs - Thecus N5200B PRO User Manual

System Settings

The System menu gives you a wealth of settings that you can use to configure
your N5200PRO's system administration functions. You can set up system
notifications, view system logs, and even upgrade firmware from this menu.

System Notifications

From the System menu, choose the
Notification item, and the Notification
Configuration screen appears. This screen
lets you have the N5200PRO notify you in
case of any system malfunction. Press
Apply to confirm all settings. See following
table for a detailed description of each item.
Consult with your mail server
NOTE
administrator for email server
information.
Notification Configuration
Item
Beep Notification
Email Notification
SMTP Server
Port
Auth Type
SMTP Account ID
Account Password
Confirm Account
Password
Receiver's E-mail
Address
Test E-Mail

System Logs

From the System menu, choose the Logs
item and the System Logs screen appears.
This screen shows a history of system usage
and important events such as disk status,
network information, and system booting.
See the following table for a detailed
description of each item:
Description
Enable or disable the system beeper that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Specifies the hostname/IP address of the SMTP server.
Specifies the port to send outgoing notification emails.
Select the SMTP Server account authentication type.
Set the SMTP Server Email account ID.
Enter a new password.
Confirm a new password.
Add one or more recipient's email addresses to receive email
notifications.
Click to send out a test e-mail to make sure the settings are
correct.
46