Printing A5/Statement Or Jis-B5/Executive Sizes - Lexmark W840 User Manual

Printing A5/Statement or JIS-B5/Executive sizes

When Auto Size Sensing is set to On, the printer cannot distinguish between Statement and A5 or Executive and JIS-B5.
Follow these directions to change the Size Sensing setting.
1
Make sure the printer is off.
2
Press and hold the
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
Tray 1 Sensing appears on the second line of the display.
5
Press and release
then press
The first line of the display shows the selected input option, and the second line shows the current setting.
6
Press
then press
Submitting Selection appears briefly on the display, and then is replaced by Config Menu on the first line and
Size Sensing on the second line.
7
Press and release
Activating Menu Changes appears briefly, followed by Performing Self Test. The printer returns to Ready.
Downloaded From ManualsPrinter.com Manuals
Note: This is not necessary when printing from the multipurpose feeder.
and buttons while you turn the printer on.
until Size Sensing appears, and then press
or to select the input option that has A5/Statement or JIS-B5/Executive loaded, and
.
or to change the setting to Sense A5/Sense Statement or Sense JIS-B5/Sense Executive, and
.
or until
Printing A5/Statement or JIS-B5/Executive sizes
Printing
.
Exit Config Menu appears, and then press
69
.