Advertisement
CARF-Models Ltd.
Slide every hinge
down into the slot
until the shoulder
touches the wing
surface
Inner and center hinge of center wing
Note: When you glue the flap hinges to the outer wing, (where the root hinge does not have a
wood support in the spar) please remember that the control rod will need clearance below the
20 mm tube. So you might have to cut the outer one of the front hinges short, as shown on the
photo, before you finally glue it in.
Instruction Manual F4U-1D Corsair
info@carf-models.com
Center hinge of center wing top view
Outer center wing hinge and both outer
wing hinges
cut here
Page 23
Advertisement
