Bridge Connection - D-Link DSL-2750U User Manual
Wireless n adsl2+ usb modem router
Hide thumbs
Also See for DSL-2750U:
- User manual (210 pages) ,
- Quick installation manual (42 pages) ,
- Technical support setup procedure (19 pages)
Table of Contents
Advertisement
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Bridge Connection
In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page. After switching to the expert settings mode, the following sections
are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), and
VLAN.
Figure 41. Configuring Bridge WAN connection.
Page 59 of 174
Configuring via Web-based Interface
Advertisement
Table of Contents
