Pin - D-Link DSL-2750U User Manual

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
IMEI
Signal level
Operator name
Mode

PIN

On the USB modem / PIN page, you can change the PIN code of the identification card inserted
into your USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are not available for CDMA USB modems.
To disable the PIN code check, select the Disable PIN check checkbox, enter the current PIN
code in the PIN code field and click the Enter button.
To enable the PIN code check, deselect the Disable PIN check checkbox, enter the PIN code,
used before disabling the check, in the PIN code field and click the Enter button.
The code stored in the memory of the USB modem.
The signal level at the input of the modem's receiver. The zero signal
level shows that you are out of the coverage area of the selected
operator's network.
When the needed network is available, the name of the operator is
displayed in this field.
A type of the network to which the USB modem is connected (2G or 3G).
Figure 106. The USB modem / PIN page.
Page 146 of 174
Configuring via Web-based Interface
Description