Lan - D-Link DSL-2750U User Manual

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual

LAN

To configure the router's local interface, proceed to the Net / LAN page.
If needed, edit the basic parameters of the local interface.
Parameter
IP Address
Netmask
On the page, you can also specify parameters for the additional local subnet.
Figure 74. Configuring parameters for the additional local subnet.
Parameter
IP Address 2
Netmask 2
NAT 2
Firewall 2
When needed settings are configured, click the Save button.
Figure 73. Basic settings of the local interface.
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.1.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
An alias IP address of the router's IP address.
A mask of the additional local subnet.
Select the checkbox if you want one WAN IP address to be used for
all computers of the additional local subnet. For the main local
subnet, you can select the NAT checkbox while creating WAN
connection via the Click'n'Connect Wizard or on the Net / WAN
page.
Select the checkbox to enable protection against ARP and DDoS
attacks for all computers of the additional local subnet. For the main
local subnet, you can select the Firewall checkbox while creating
WAN connection via the Click'n'Connect Wizard or on the Net /
WAN page.
Page 99 of 174
Configuring via Web-based Interface
Description
Description