D-Link DSL-2750U User Manual page 62

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Figure 43. Configuring Bridge WAN connection. The expert settings mode. The Ethernet section.
Parameter
MTU
MAC
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
Apply
After clicking the
Checking Internet Availability section, page 67).
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the router at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
button, the page for checking the Internet availability opens (see the
Page 62 of 174
Configuring via Web-based Interface
Description
) to set the