D-Link DSL-2750U User Manual page 142

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Outgoing
After specifying the needed parameters, click the Save button.
To edit an existing rule for the Port Triggering function, select a needed field in the relevant line of
the table, change its value, and click the Save button.
To remove an existing rule for the Port Triggering function, select the checkbox located to the left
of the relevant line in the table and click the Save button.
A protocol to which this rule will be applied upon transferring data
from the specified port range.
Page 142 of 174
Configuring via Web-based Interface
Description