D-Link DSL-2750U User Manual page 124

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
You can specify the following parameters:
Parameter
Name
LANs
WANs
Click the Save button.
!
When you add an interface to the new group, it is excluded from the group to which it has
been assigned before.
To edit or remove an existing group, select the relevant group on the Advanced / Interface
grouping page. On the page displayed, change the parameters and click the Save button, or click
the Delete button. When you delete a group, interfaces assigned to it are reassigned to the
DEFAULT group.
A name for the group for easier identification. You can specify any
name.
The list of available internal interfaces is displayed in the left drop-
down list.
Use the button ==> to move interfaces to the right drop-down list.
WAN connections to which the new group will be assigned. WAN
connections of PPPoA and IPoA type cannot be added to groups.
Use the button ==> to move WAN connections to the right drop-
down list.
Page 124 of 174
Configuring via Web-based Interface
Description