Connection Type: Bridge Mode - D-Link DSL-X1852E User Manual

Section 4 - Configuration
Select Bridge Mode to use the DSL-X1852E as a network bridge to extend an
existing network.
IPv4 Settings
Connection: Select Bridge Mode.
Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing
mechanism.
Select Bridged Only LLC or Bridged Only VC-Mux as the
Connection Type:
encapsulation method. This is only available for ADSL.
Click Save when you are done. Or click Delete to delete the configuration
profile for the interface.
D-Link DSL-X1852E User Manual

Connection Type: Bridge Mode

41