Set Lengths For Discrete 2 Of 5 - Symbol P460 Product Reference Manual

Parameter Menus

Set Lengths for Discrete 2 of 5

Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within
a specific range. The length of a code refers to the number of characters (i.e., human
readable characters) the code contains, and includes check digits. The default is set to a
length of 12 characters.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select D 2 of 5 One Discrete Length, then scan 1, 4,
the only D 2 of 5 symbols decoded are those containing 14 characters. Numeric bar codes
begin on page 5-99. If you make an error, or wish to change your selection, scan
CANCEL on page 5-101.
D 2 of 5 - ONE DISCRETE LENGTH
Two Discrete Lengths - This option allows you to decode only those codes containing two
selected lengths. For example, if you select D 2 of 5 Two Discrete Lengths, then scan
0, 2, 1, 4, the only D 2 of 5 symbols decoded are those containing 2 or 14 characters.
Numeric bar codes begin on page 5-99. If you make an error, or wish to change your
selection, CANCEL on page 5-101.
D 2 of 5 - TWO DISCRETE LENGTHS
5-65