Mitsubishi ASX Manual page 71

4. Make sure the lap belt is positioned as low as
possible on the hips and pull the shoulder
belt to adjust the slackness of the lap belt.
To unfasten
1. Hold the latch plate (E) and push the button
on the buckle (F).
2. Push the button (G) on the buckle (C) using
the latch plate (E) to disconnect the seat belt
from the buckle.
3. Retract the seat belt and remove it from the
seat belt guide (A).
Seat and seat belts
4. After the seat belt is retracted completely, in-
sert the latch plate (E) into the upper slit (H)
and the latch plate (B) into the lower slit (I).
2-13
2