Mitsubishi ASX Manual page 258

For pleasant driving
l If the name you selected has matching data
in the mobile phone book but no telephone
number is registered under the selected loca-
tion, the voice guide will say "{home/work/
mobile/other} not found for <name>. Would
you like to try again?"
Answer "Yes," and the system will return to
Step 3.
Answer "No," and the call will be cancelled.
Start over again from Step 1.
6. The voice guide will say "Calling <name>
<location>" and then the system will dial the
telephone number.
NOTE
l When the confirmation function is on, the sys-
tem will ask if the name and location of the
receiver are correct.
If the name is correct, answer "Yes."
If you want to change the name or location to
call, answer "No." The system will return to
5
Step 3.
Redialing
You can redial the last number called, based on the
history of dialed calls in the paired cellular phone.
Use the following procedure to redial.
1. Press the SPEECH button.
2. Say "Redial."
SEND function
During a call, press the SPEECH button to enter
voice recognition mode, then say "<numbers>
SEND" to generate DTMF tones.
5-50
For example, if during a call you need to simulate
the press of a phone button as a response to an auto-
mated system, press the SPEECH button and speak
"1 2 3 4 pound SEND" and the 1234# will be sent
on your cellular phone.
Receiving calls
If an incoming phone call is received while the ig-
nition switch or the operation mode is in ON or
ACC, the audio system will be automatically
turned on and switched to the incoming call, even
when the audio system was originally off.
The voice guide announcement for the incoming
call will be output from the front passenger's seat
speaker.
If the CD player or radio was playing when the in-
coming call was received, the audio system will
mute the sound from the CD player or radio and out-
put only the incoming call.
To receive the call, press the PICK-UP button on
the steering wheel control switch.
When the call is over, the audio system will return
to its previous state.
MUTE function
At any time during a call, you can mute the vehicle
microphone.
Pressing the SPEECH button and then saying
"Mute" during a call will turn ON the MUTE func-
tion and mute the microphone.
Saying "Mute off" in the same way will turn off
the MUTE function and cancel the mute on the mi-
E00761300035
crophone.
Switching between hands-free mode and private
mode
®
The Bluetooth 2.0 interface can switch between
Hands-free mode (Hands-free calls) and private
mode (calls using cellular phone).
If you press the SPEECH button and say "Transfer
E00761600025
call" during a Hands-free call, you can stop the
Hands-free mode and talk in private mode.
To return to Hands-free mode, press the SPEECH
button again and say "Transfer call".
Phone book function
®
The Bluetooth 2.0 interface has 2 types of unique
phone books that are different from the phone book
stored in the cellular phone. They are the vehicle
phone book and the mobile phone book.
These phone books are used to register telephone
numbers and to make calls to desired numbers via
the voice recognition function.
NOTE
l Disconnecting the battery cable will not de-
lete information registered in the phone book.
E00760300054
Vehicle phone book
This phone book is used when making calls with
the voice recognition function.
Up to 32 names can be registered in the vehicle
phone book per language.
Also, each entry has 4 locations associated with:
home, work, mobile and other. You can register
one telephone number for each location.
You can register a desired name as a name for any
phone book entry registered in the vehicle phone
book.
E00761400036
E00763700020
E00763800050