Mitsubishi ASX Manual page 102

Instruments and controls
Information screen (when the ignition
switch is turned from the "LOCK" po-
sition to the "ON" position or the oper-
ation mode is changed from OFF to
ON)
When the ignition switch is turned to the "ON" po-
sition or the operation mode is put in ON, the dis-
play screen switches in the following order.
Type 1
3
Type 2
1- Screen when the ignition switch or the opera-
tion mode is OFF
2- System check screen
3- Screen when the ignition switch or the opera-
tion mode is ON
System check screen
When the ignition switch is turned to the "ON" po-
sition or the operation mode is put in ON, the sys-
tem check screen is displayed for about 4 seconds.
If there is no fault, information screen (when the ig-
nition switch or the operation mode is ON) is dis-
played.
If there is a fault, the screen changes to warning dis-
play.
3-08
Refer to "Warning display list (when the ignition
switch or the operation mode is ON)" on page
3-30.
Type 1 Type 2
E00520700621
NOTE
l The system check screen display varies de-
pending on the customer's equipment.
Service reminder
When the time for periodic inspection arrives, the
warning display is displayed for a few seconds af-
ter the ignition switch or the operation mode ON
screen. Refer to "Service reminder" on page 3-15.
Type 1
Type 2
Drive mode indicator display screen*
E00520800303
Type 1
Type 2
This displays the 4WD status.