Initialising The Ip Cell Station - Panasonic KX-NCP0158 Quick Installation Manual

13 Initialising the IP Cell Station

13 Initialising the IP Cell Station
If the IP-CS does not operate properly, initialise the IP-CS. Before initialising the IP-CS, try the system feature
again to confirm whether there definitely is a problem or not.
The settings that are configured by using the IP Terminal Maintenance Console are changed back to their
factory default by initialising the IP-CS. For more details, refer to "D Information about IP Terminal Maintenance
Console".
While initialising the IP-CS, calls cannot be made or received and ongoing conversations will be disconnected.
1.
Switch the Initialised Mode switch from OFF to ON.
2.
Supply electricity to the IP-CS using an AC adaptor, PoE hub, or PoE adaptor (turn on the IP-CS).
3.
While the LED indicator flashes red (Moderate Flashing: 120 times per minute), switch the Initialised Mode
switch from ON to OFF.
Note
When the LED turns off for a while then flashes red, initialisation is complete.
62 Quick Installation Guide
DIP Switch
OFF ON
1
2
3
4
5
6
7
8
Initialised Mode Switch