Panasonic KX-NCP0158 Quick Installation Manual page 43

Connecting an AC Adaptor to an IP-CS
IP-CSs comply with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE is available on your network,
these IP-CSs can receive the necessary power supply from the network through the network cable. In this
case, no AC adaptor is needed for the IP-CSs.
However, if PoE is not available, you will need to connect an AC adaptor to the IP-CS.
WARNING
When installing or testing a product with an external AC adaptor, the AC adaptor should be plugged
into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor may cause it to become disconnected.
CAUTION
The DC jack cover poses a choking hazard. Keep the DC jack cover out of reach of children.
Note
Use only the optional AC adaptor KX-A421 (PQLV216) for the IP-CS.
1.
Remove the DC jack cover, and connect the AC adaptor cord to the IP-CS.
Cover
7 Connecting IP Cell Stations
AC Adaptor Cord
Quick Installation Guide 43