Panasonic KX-NCP0158 Quick Installation Manual page 47

3.
Select the desired classification for the CS in the CS Class column.
Note
For details about other parameters on this screen, refer to the PC Programming Manual for your PBX.
4.
Click Apply.
Note
Please wait about one minute after clicking Apply to allow changes to take effect.
5.
Click Command to return the status of the port to "INS".
Setting the Synchronising CS Search Order (Primary/Secondary)
The search order of each CS can be set by the following procedure:
1.
Under Maintenance, click Air Synchronisation.
2.
Select the desired cell in the Connection column, and then click Command to change the status of the
port to "OUS".
3.
Select the desired CS number in the Index column for each Primary CS and Secondary CS.
Note
For details about other parameters on this screen, refer to the PC Programming Manual for your PBX.
4.
Click Apply.
8 Registering IP Cell Stations
Quick Installation Guide 47