Battery Information - Panasonic KX-TG5200C Operating Instructions Manual

TG5200CE.fm.fm Page 12 Tuesday, March 23, 2004 11:37 AM
Installation
Recharge
Recharge the battery when:
— "Recharge battery" is displayed on the handset,
— " " flashes, or
3
— the handset beeps intermittently while it is in use.
• The display will continually indicate "Recharge battery" and/or "
flash when the handset battery is charged for less than 15 minutes and the
handset is lifted off the base unit.
• If the battery has been discharged, the handset will display "Charge for 6 HRS"
and " " when you place the handset on the base unit. The handset will not
4
work unless the battery is charged. Continue charging.
Battery replacement
If you cleaned the charge contacts and fully charged the battery, but after a few
telephone calls, "Recharge battery" is displayed and/or "
flash, or "Charge for 6 HRS" and "
to be replaced. Please replace with a new Panasonic HHR-P104 battery.
To replace the battery, see page 11.
A nickel metal hydride battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for
information on how to recycle this battery

Battery information

After your Panasonic battery is fully charged, you can expect the following performance:
While in use (TALK)
While not in use (Standby)
While using the Clarity Booster feature (p. 22)
• A fully charged battery will give you up to 5 hours of continuous talk time, or keep
your handset in Standby mode to receive incoming calls for up to 11 days (if no
phone calls are made). Battery power is consumed whenever the handset is off
the base unit, even when the handset is not in use. The longer you leave the
handset off the base unit, the time you can actually talk on the handset will be
shortened. Actual battery performance depends on a combination of how often
the handset is in TALK mode and how often it is in Standby mode.
• Clean the charge contacts of the handset and the base unit with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease, dust or
high humidity, otherwise, the battery may not charge properly.
• If the battery is fully charged, you do not have to place the handset on the base
unit until "Recharge battery" is displayed and/or "
maximize the battery life.
• If you want to keep the battery fully charged at all times, place the handset on the
base unit when the handset is not being used. The battery cannot be
overcharged.
• When the Clarity Booster feature is turned on automatically or manually, battery
operating time may be shortened (p. 22).
12
:
" are displayed, the battery may need
4
.
Operation
SPIPRIVACY3
IN USE
Recharge battery
" will
3
" continues to
3
Operating time
Up to 5 hours
Up to 11 days
Up to 3 hours
" flashes. This will
3
[1]