If The Following Appears On Your Display - Panasonic KX-TG5200C Operating Instructions Manual

Cordless phone system5.8 ghz expandable cordless phone system
Hide thumbs Also See for KX-TG5200C:
Table of Contents

Advertisement

TG5200CE.fm.fm Page 56 Tuesday, March 23, 2004 11:37 AM

If the Following Appears on Your Display...

The following will be displayed when the unit needs your attention.
Display message
Recharge battery
Charge for 6 HRS
No link to base.
Move closer to
base and try
again.
Please lift up
and try again.
Busy
Invalid
Error!!
System is busy.
Please try again
later.
56
Cause & Remedy
• The battery needs to be charged. Recharge the
battery (p. 12).
• The battery has been discharged. The handset will
not work. Fully charge the battery (p. 11).
• The handset has lost communication with the base
unit. Walk closer to the base unit, and try again.
• Confirm that the base unit's AC adaptor is plugged in.
• Raise the base unit antennas.
• The handset's registration may have been cancelled.
Re-register the handset (p. 54, 55).
• A handset button was pressed while the handset was
on the base unit (or charger, for accessory handset
users, p. 3). Lift the handset and press the button
again.
• The called handset is in use.
• Privacy mode is on for the call you tried to join
(p. 42).
• The handset you tried to send phone book items to is
in use.
• The handset you are calling is too far from the base
unit.
• The called handset has not been registered to the
base unit.
• You selected your own extension number.
• When you tried to register or deregister the handset,
the handset and base unit could not link for some
reason, such as interference from electrical
appliances. Move the handset and base unit away
from any electrical appliances and try again.
• If more than one handset is in use, you may not be
able to register/deregister. Try again later.
• Another handset tried to send phone book items to
you but copying stopped. Have the other handset
user re-send the items to you (p. 34, 35).
• If more than one other user is using the handset and/
or base unit, such as conducting outside/intercom
calls, you may not be able to use the handset. Try
again later.
• The handset has lost communication with the base
unit. Walk closer to the base unit and try again.

Advertisement

Table of Contents
loading

Table of Contents