Table of Contents
Advertisement
" Settings
Recharge
Recharge the battery when:
—"Recharge" is displayed,
—"
" flashes on the display, or
—the handset beeps intermittently while it is in
use.
≥If you DO NOT recharge the handset battery for more than 15 minutes, the
display will keep indicating "Recharge" and/or "
Battery information
After your Panasonic battery is fully charged (p. 13):
Operation
While in use (TALK)
While not in use (Standby)
≥The battery operating time may be shortened depending on usage conditions,
such as viewing the Call Display Caller List or directory list, and ambient
temperature.
≥Clean the handset and the base unit charge contacts with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or
high humidity. Otherwise the battery may not charge properly.
≥If the battery is fully charged, you do not have to place the handset on the base
unit until "Recharge" is displayed and/or "
the battery life.
≥The battery cannot be overcharged.
Standby Mode
(The handset is off the base unit)
The handset goes into the standby mode after you finish using the
handset (making/answering a call, viewing the Caller List or directory list
etc.). The display is blank, but the handset can receive calls.
The battery operating time is conserved in this mode.
14
Recharge
" will continue to flash.
Operating time
Up to about 6 hours
Up to about 14 days
" flashes. This will maximize
Advertisement
Table of Contents
