Kick Starter Installation - Honda NU50 Shop Manual

r::iJ\
HONDA
~
NUSO·NUSOM
DRIVE PULLEY/KICKS STARTER/CLUTCH/DRIVEN PULLEY
DRIVE FACE ASSEMBLY
KiCK STARTER INSTALLAJ;ION
,
Install the kick starte, driven gear by cleaning the
gcal
matching
surface ;:
Clean the taper on the rankshaft ilnd Install the
driven gear.
Install the dri'o'!! face i1ssembly (page 8-8).
Apply grease to the luck spindle and idll) shaft bush·
ing and install then inl0 the left crankcase.
Position the thrust washer on the lett crankcase by
coating to the washer with grease.
Install the
stoppel'
plate.
ARROW
BUSHINGS
DRIVE GEAR IDLE GEAR
Install the kick starter drive gear and can aligning the
friction spring with the groove in the lelt..crankcase.
Point the arrow milrk 011 the dnye gear toward the
craflKshaft, placing the cam on the drive gear by
turning it clockwise.
Install the idle shalt, alig,'ing its punch mark with the
kick stilrter carn punch mark.
"
CAM
THRUST WASHER
PUNCH
MARKS
SPRING
Install the kick starter spindle by aligning the punch
marks.
Hook
the return spring
to
the left crankC<lse
ilS
shown.
Install the thrust washer on the spindle.
Install the drive belt and install the crankcase cover
(Page
a·g).
Date of Issue: Nov.. 1981
17. 40NDA MOTOR COo. lTD.
SPRING
81
MARKS
8-15