Troubleshooting - Black & Decker CS1030L Instruction Manual

Problem
• Unit will not start.

TROUBLESHOOTING

Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
27
ENGLISH
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced at a Black & Decker service
center or authorized servicer.)
• Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to
trip, discontinue use immediately and have
it serviced at a Black & Decker service
center or authorized servicer.)
• Have cord or switch replaced at
Black & Decker Service Center or
Authorized Servicer.