Recalling Equalizer Curves; Adjusting 3-Band Parametric Equalizer - Pioneer avh-p7950dvd Operation Manual

Hide thumbs Also See for avh-p7950dvd:
Table of Contents

Advertisement

Section
17
Audio Adjustments
2
Touch any of the following touch panel
keys to select a listening position.
! FRONT LEFT – Front seat left
! FRONT RIGHT – Front seat right
! FRONT – Front seats
! ALL – All seats
# To cancel the selected listening position,
touch OFF.
Note
When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to Adjusting the speaker
output levels on page 94.

Recalling equalizer curves

The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
There are eight stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
SUPER BASS (S. BASS)
POWERFUL
NATURAL
VOCAL
FLAT
CUSTOM1
CUSTOM2
CUSTOM3
! CUSTOM1, CUSTOM2 and CUSTOM3 are
adjusted equalizer curves.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
Downloaded from Caradio-Manual.com Manuals
88
En
Equalizer curve
Super bass
Powerful
Natural
Vocal
Flat
Custom 1
Custom 2
Custom 3
curves by switching alternatively between
FLAT and a set equalizer curve.
When selecting multi-channel
mode
% Touch PARAMETRIC EQ on the sound
setting menu to select the equalizer.
Touch PARAMETRIC EQ repeatedly to switch
between the following equalizers:
POWERFUL—NATURAL—VOCAL—FLAT—
CUSTOM1—CUSTOM2—CUSTOM3—
LAST MEMORY—SUPER BASS (S. BASS)
# You can select LAST MEMORY only when the
adjusted equalizer curve is not memorized in this
unit.
When selecting 2-channel mode
% Touch GRAPHIC EQ on the sound set-
ting menu to select the equalizer.
Touch GRAPHIC EQ repeatedly to switch be-
tween the following equalizers:
POWERFUL—NATURAL—VOCAL—FLAT—
CUSTOM1—CUSTOM2—CUSTOM3—
LAST MEMORY—SUPER BASS (S. BASS)
# You can select LAST MEMORY only when the
adjusted equalizer curve is not memorized in this
unit.
Adjusting 3-band
parametric equalizer
For custom equalizer curves (CUSTOM1 to
CUSTOM3), you can adjust the front, rear,
front center and rear center equalizer curves
separately by selecting a center frequency, an
equalizer level, and a Q factor for each band.
! Custom equalizer curves can be created
common to all sources.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents