Using An Equalizer You Have Registered - Pioneer ELITE VSX-LX305 Instruction Manual

1
2
3
1 The speaker currently being adjusted. To adjust another speaker, tap the "
next to it and select another speaker.
2 Displays the Menu screen. From the menu, you perform actions such as reset
the speaker adjustments and cancel and exit the adjustments. You can also
copy data from other slots.
3 Drag the points on the equalizer curve side to side to change the frequency
and up or down to change the boost.
• You can add a point by tapping on the curve where there isn't a point.
4 Recalculate the characteristics from the adjusted content.
5 Transfer the adjusted content to the unit.
6 The value of the point being adjusted. Tap the "
it.
5. When adjustment is finished, tap 4 to recalculate, then tap 5 to transfer the
adjusted data to the unit.
• In the Home screen, when the number of speaker channels, etc., is changed
in "System Setup" - "Speaker" - "Configuration", the adjusted content is
deleted.

Using an equalizer you have registered

When you select a saved slot in "Room EQ" - "Dirac Live" ( →p76) in "AV
Adjust", you can use the registered equalizer.
4
5
6
"
" next to the point to delete
Setup
156