When An Operation Is Prohibited; To Protect The Lcd Screen; For Viewing Lcd Comfortably; What The Marks On Dvds Indicate - Pioneer avh-p7950dvd Operation Manual

Section
02 Before You Start

To protect the LCD screen

! Do not allow direct sunlight to fall on the
display when this unit is not being used.
Extended exposure to direct sunlight can
result in LCD screen malfunction due to
the resulting high temperatures.
! When using a cellular phone, keep the an-
tenna of the cellular phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.
! Never touch the screen with anything be-
sides your finger when operating the touch
panel function. The screen can scratch
easily.

For viewing LCD comfortably

Due to its construction, the viewing angle of
the LCD screen is limited. You can adjust it by
changing either screen size or picture adjust-
ment.
Changing the wide screen size
By changing the screen size from 4:3 to 16:9,
you can adjust the screen so that the screen
can fit to the video image you are playing.
For details concerning operation, refer to
Changing the wide screen mode on page 112.
Changing the picture adjustment
You can make the best adjustment to the pic-
ture display by changing BRIGHTNESS,
CONTRAST, COLOR and HUE. You can also
dim or enlight the overall picture image using
DIMMER.
For details concerning operation, refer to
Changing the picture adjustment on page
113.
Downloaded from Caradio-Manual.com Manuals
12
En
What the marks on DVDs
indicate
The marks below may be found on DVD disc
labels and packages. They indicate the type of
images and audio recorded on the disc, and
the functions you can use.
Mark Meaning
Indicates the number of audio sys-
2
tems.
Indicates the number of subtitle lan-
2
guages.
Indicates the number of viewing an-
3
gles.
Indicates the picture size (aspect ratio:
16 : 9 LB
screen width-to-height ratio) type.
2
3
Indicates the number of the region
where playback is possible.
4
ALL

When an operation is prohibited

When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon
the screen.
! The icon may not appear with certain
discs.

Resetting the microprocessor

Pressing RESET lets you reset the micropro-
cessor to its initial settings without changing
the bookmark information.
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
appears on