Test The Network Connectivity - TP-Link Archer C3150 User Manual

Chapter 13
13 2

Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
3. Enter the information with the help of page tips:
1 ) Choose ping
• ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• traceroute is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the Target IP Address/Domain Name
4. Click Start to begin the diagnostics.
Tips:
Click Advanced, you can modify the ping count, ping packet size, test timeout time, or max hop. It's recommended
to keep the default value.
The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through ping.
The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through traceroute.
System Tools > Diagnostics.
or traceroute as the diagnostic tool to test the connectivity;
Manage the Router
of the tested host.
93