Access Control - TP-Link Archer C3150 User Manual

Chapter 9
• TCP-SYN-FLOOD Attack Filtering
Control Protocol-Synchronize) flood attack.
Tips:
The level of protection is based on the number of traffic packets. The protection will be triggered immediately
when the number of packets exceeds the preset threshold value (the value can be set on
Tools > System Parameters
DoS Host List.
5 If you want to ignore the ping packets from the WAN port, select
if you want to ignore the ping packets form the LAN port, select
6 Click Save to make the settings effective.
9 2

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
- Enable to prevent the TCP-SYN (Transmission
> DoS Protection Settings), and the vicious host will be displayed in the
Block or allow specific client devices to access my network (via
wired or wireless).
1 Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2 Go to Advanced >
3 Enable Access Control.
4 Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s)
1 ) Select Blacklist
Security > Access Control.
and click Save.
Network Security
Advanced > System
Blocked
Forbid Wan Ping;
Forbid Lan Ping.
57