Test The Network Connectivity - TP-Link Archer A6 User Manual

Chapter 14
4. You can enable Night Mode
be off during this period.
Note: The effective time schedule for
Time to get the correct system time.
5. Click Save to make the settings effective.

14. 3. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. Enter the information with the help of page tips:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
if needed, and set a time period, and then the LEDs will
Night Mode is based on the system time of the router. Refer to
System Tools > Diagnostics.
or Traceroute as the diagnostic tool to test the connectivity;
Manage the Router
Set Up System
81