Test The Network Connectivity - TP-Link Archer AC1900 User Manual

Chapter 13
• Connection Require Authentication - Under your ISP's instructions, select the
authentication mode. If you select
for the ACS server to log in to the router.
• Path - Enter the path for the ACS server to log in to the router.
• Port - Enter the port that connects to the ACS server.
13 9

Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. Enter the information:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Tracert is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the IP Address
3 ) Modify the Ping Packet Number
keep the default value.
4 ) If you have chosen Tracert, you can modify the
recommended to keep the default value.
4. Click START to begin the diagnostics.
Basic
System > Diagnostics.
or Tracert as the diagnostic tool to test the connectivity;
or Domain Name
and the
or Digest, enter the username and password
of the tested host.
Ping Packet Size. It's recommended to
Traceroute Max
Manage the Router
TTL. It's
78