Set The Router's Pin; Use The Wps Wizard For Wi-Fi Connections - TP-Link Archer C3150 User Manual

Chapter 12
2. Go to Advanced >
12 7 1

Set the Router's PIN

Router's PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
Note:
1. If you want to enable/disable the WPS feature, go to
or clear the Enable WPS check box.
2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS
supported devices can connect to your router with the PIN. The default PIN is labeled on the bottom of the router.
12 7 2

Use the WPS Wizard for Wi-Fi Connections

1. Select a setup method:
Push Button(Recommended): Click the
•
two minutes, push the WPS button on the client device.
• PIN: Enter the client's PIN, and click Connect.
Wireless > WPS .
Advanced
Customize Your Network Settings
> System Tools > System Parameters
Connect button on the screen. Within
> WPS, select
84