Change The Lan Settings; Configure To Support Iptv Service - TP-Link Archer C3150 User Manual

Chapter 12
12 1

Change the LAN Settings

The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its
web-based management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
3. Type in a new IP Address appropriate to your needs. And leave the
the default settings.
4. Keep IGMP Snooping as enabled by default. IGMP Snooping is the process of listening
to IGMP (Internet Group Management Protocol) network traffic. The function
prevents hosts on a local network from receiving traffic for a multicast group they
have not explicitly joined.
5. Click Save.
Note:
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same
subnet with the old one, then you should reconfigure them.
12 2

Configure to Support IPTV Service

IPTV is the abbreviation of Internet Protocol Television. The service can only be delivered
through the Internet, and our router provides a specific LAN port for IPTV.
By automatically seperating IPTV from Internet surfing, we guarantee you a high quality
of vedio streaming and a high speed of Internet surfing.
I want to:
Network > LAN.
Configure IPTV setup to enable Internet/IPTV/Phone service
provided by my Internet Service Provider (ISP).
Customize Your Network Settings
Subnet Mask as
75