Test The Network Connectivity - TP-Link TPL-WR941HP User Manual

Chapter 11
2. Go to System Tools
3. Tick the Night Mode
4. Specify a time period in the
this period.
5. Click Save.

11. 4. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Enter the information with the help of page tips:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
2 ) Enter the IP Address
4. Click Start to begin the diagnostics.
Tips: Click Advanced, you can modify the ping count, ping packet size or the Traceroute Max TTL. It's recommended
to keep the default value.
> LED Control.
checkbox.
LED Off Time
System Tools > Diagnostics.
or Traceroute as the diagnostic tool to test the connectivity;
or Domain Name
as needed, and the LEDs will be off during
of the tested host.
Manage the Router
62