Remote Management - TP-Link Archer C3150 User Manual

Chapter 13
Note:
1. The IP address of the local device must be in the same subnet as the router's LAN IP address.
2. If you want that all local devices can manage the router, just leave the
4. Click Save to make the settings effective. Now only the device using the IP address or
MAC address you set can manage the router.
13 7

Remote Management

By default, the remote devices are not allowed to manage the router from the Internet.
Follow the steps below to allow remote devices to manage the router.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced
Management section.
3. Tick the checkbox to enable
4. Keep the Port as the default setting. Enter the IP address or MAC address of the
remote device to manage the router.
Note: If you want that all remote devices can manage the router, just leave the
MAC Address field blank.
5. Click Save to make the settings effective. Now, only the device using the IP address
or MAC address you set can log in to
(such as http://113.116.60.229:80) to manage the router remotely.
Tips:
1. You can find the Internet IP address of the router on
2. The router's Internet IP is usually a dynamic IP. Please refer to
log in to the router through a domain name.
> System Tools> Administration
Remote Management.
http://router's Internet IP address:port number
Basic
IP/MAC Address
page. Locate the
> Network Map > Internet.
Set Up a Dynamic DNS Service Account
Manage the Router
field blank.
Remote
IP/
if you want to
97