Desktop Installation - Planet GSW-1600HP User Manual

3.1 Desktop Installation

To install the 802.3at PoE+ Switch on desktop, simply follow the following steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of the
802.3at PoE+ Ethernet Switch, as shown in Figure 3-1.
Figure 3-1: Attaching the Rubber Feet to the 802.3at PoE+ Switch
Step2: Place the 802.3at PoE+ Switch on desktop near an AC power source.
Step3:
Keep enough ventilation space between the 802.3at PoE+ Switch and the
surrounding objects.
When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1, Section 4, under Specifications.
Note
Step4: Connect your 802.3at PoE+ Switch to 802.3af/802.3at complied Power
Devices (PD) and other network devices.
A. Connect
10/100/1000BASE-T RJ45 ports on the front panel of the 802.3at
PoE+ Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers, etc.
Connection to the Switch requires UTP Category 5, 5e, 6 network
cabling with RJ45 tips. For more information, please see the
Cabling Specification in Appendix A.
Note
Step5: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall outlet.
When the 802.3at PoE+ Switch receives power, the Power LED should remain solid
Green.
14
one end of a standard network cable to the