ceiling or any unreachable place. It helps to lower the installation costs and
simplify the installation effort. All RJ45 copper interfaces of the 802.3at PoE+
Switch support 10/100/1000Mbps auto-negotiation for optimal speed detection
through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/
MDI-X that can detect the type of connection to any Ethernet device without
requiring special straight-through or crossover cables.
Flexible Extension Solution (GSW-2620HP only)
The two mini-GBIC slots built in the GSW-2620HP are compatible with the
1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink
to backbone switch and monitoring center in long distance. The distance can be
extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120
kilometers (single-mode fiber or WDM fiber). They are well suited for applications
within the enterprise data centers and distributions.
1.3 Features
Physical Port
16/24-port 10/100/1000BASE-T Gigabit RJ45 copper
2 1000BASE-X mini-GBIC/SFP slots (GSW-2620HP only)
Power over Ethernet
Complies with IEEE 802.3at High Power over Ethernet
Complies with IEEE 802.3af Power over Ethernet
Up to 16/24 ports of IEEE 802.3af/802.3at devices powered
Supports PoE Power up to 30.8 watts for each PoE port
Each port supports 52V DC power to PoE Powered Device
220-watt PoE budget
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
Switching
Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
Flow control for full duplex operation and back pressure for half duplex opera-
tion
Integrates address look-up engine, supporting 8K absolute MAC addresses
9K Jumbo frame supports all speeds (10/100/1000Mbps)
IEEE 802.1Q VLAN transparency
7